WHT PR1 MKII Hi-End Speakers

WHT PR1 MKII Hi-End Speakers for sale. Audiophile Speakers. Excellent condition. Please, see pictures.
I’m the original owner. Purchased from the official dealer. Original box and papers. Spikes included.

WHT was founded in Australia in 1993 with the sole purpose of creating uncompromising Hi-End loudspeakers. The dynamic drivers used in the speakers are manufactured at the WHT factory and have very high technical characteristics and a small spread in parameters. WHT designer and developer Mark Mozgawa is constantly involved in the production of the highest quality instruments and studio loudspeakers. Previously worked as a musician and had the benefit of using countless different types of loudspeakers on stage and in the studio.

A few highlights of all WHT models:
– No crossover
-Ultra-precisely assembled mid-bass of our own making
– Internal wiring silver 6N
-No solder used
-Highest sensitivity
-Highest dynamics and macrodynamics
-Extreme transparency and resolution throughout the range
“Efficiency and other facts about acoustic systems
A speaker system with low sensitivity does not seem to be a problem for audiophiles with a 100 watt or more amplifier. In a nutshell, the main difference between a loudspeaker with an efficiency of 87 dB and a speaker system with 94 dB of sensitivity is when low level sounds are heard. Speakers with high sensitivity will reproduce the signal at a low level and with sufficient quality, while 87 dB speakers will not move at all. They will play only with a high dynamic range. It will be more correct to get not only detail at low levels, but also sound reproduction with richer, more accurate tonal structures.
When an average signal level is produced at 87 dB AC, we will get 3 basic dynamic levels, while 94 dB AC will reproduce the same signals but with 8 different dynamic levels.
At a high signal level, a device with a sensitivity of 87 dB will not be able to make any dynamic changes, and the dynamic heads will simply compress the sound. When a 94dB speaker will still handle these signals at a higher level without compression and with more dynamics.”

Cosmetic Condition: The speakers has minor signs of wear and tear as it has been in use, however these signs of wear do not affect its performance or performance. All signs of wear are shown in the photo and you can see them.
Technical condition: The speakers is fully operational and has been tested before sale.
Lot complete set: speakers, spikes for installing speakers on the floor, factory plywood boxes packing.

Specifications:
General: 2 way reflector construction with Jarrah scoop acting as a 18″ passive cone.

Drivers:
Woofer: 8″ WHT mid/bass (crossover-less) woofer.
Paper cone treated moulded not pressed. Annealed silver ribbons wired directly from woofer to the binding post – no solder.
Tweeter: 4.3″ diameter 96db/m/W ribbon enforced sandwich. Tweeter frequency response 1350Hz – 42kHz. Wired with silver ribbons direct – no solder
Frequency response: 28Hz – 42kHz +/-3db
Impedance: 10 ohm (min. 8 ohm)
Crossover: Woofer: no crossover, Tweeter: 1.7kHz
power: 1W – 350W
Dimensions:
width: 28 cm (11″)
Height: 109 cm (43″)
Depth: 35.5cm (14″)
Weight: 117 kg – Pair gross weight

The rest of the technical specifications can be found at the link on the manufacturer’s website:
https://www.whtspeakers.com/#products

Payments: PayPal, USDT, Payoneer.

Shipping: Please, contact me for shipping details. I do not ship to Russia and Belarus.
I can provide local pick up in Bonn, Germany.