Absorber Diffuser AbFuser

SSTacoustic (SubSystem Technology acoustic) presents to you Diffusor and Absorber (Abfusor) in one product, which is necessary to improve the sound image in the listening room,
and as a result of using Abfusor is a wider and more focused sound image, because this wall panel is phase coherent.
It can be made by requirements in all height ranges up to 3 m, and each panel is 49 cm wide and 16 cm deep.
More details find at:
https://sstacoustic.com/abfusor

How to position and use them?
Very easy if you follow these few basic steps:
1. The ideal position for installation is the first reflection point.
2. After that, the next ideal place (upgrade) is to place them between the speakers, and behind the listening position.
3. The next set of acoustic treatment with Abfusors goes in the direction of being perpendiculary mounted (at a right angle) to the listening position
on the left and on the right side at least one Abfusor panel, because this is where the most unpleasant occurrence of Flutter Echo in the room occurs.
4. And finally, to use the gap between the installed Abfusors on the left and right side walls, we can install them but this time horizontally
on the left and right wall at head height.
Regarding the technical specifications of the Abfusor, I can say that it works in the absorption area up to 73 Hz, they reduce noise, Echo and Reverb, and in the Diffusion area
they are wery effective in medium and high frequencies range.

The panels we use in the production of Abfusor are produced in Denmark (Acupanel international).
https://byveno.com/panels/new-greenoption/
and they have FSC certification.

Installation is very simple and there is no need for special knowledge and skills for their installation.